product description

The first-pass cleaner is also called the first-pass cleaner. The H-shaped cleaner is installed at the head roller. The scraper material is made of super wear-resistant polyurethane. The pressure of the scraper on the conveyor belt is changed by adjusting the spring to achieve the effect of thoroughly cleaning the material.

The conveyor cleaner is a device used to clean the conveyor. During the conveyor process of the belt conveyor, if residual attached materials enter the roller or roller bearing seat, the bearing wear will be accelerated, and the material sticking to the surface of the roller or roller will cause Tear and nap the conveyor belt cover, accelerating the wear and damage of the conveyor belt.

The first cleaner adopts a straight-shaped scraper, which ensures stable and low contact force between the scraper and the belt, and has a long service life. The oblong buffer hole in the middle makes the scraper have good buffering and follow-up performance and high impact resistance. The special dust jacket seals the torsion spring group to prevent the self-adjusting function from being unable to fully exert its function due to material jamming or dust accumulation.

If the cleaning device is effective, the service life of rollers, conveyor belts, rollers, etc. can be extended; therefore, the cleaning ability of the cleaner plays a decisive role in improving the operating efficiency and reliability of the belt conveyor, reducing equipment failure rates, and reducing maintenance costs. role.

A cleaner uses the elastic properties of the rubber body itself to automatically adjust the contact pressure between the cleaner scraper and the conveyor belt. The buffering effect of the rubber body ensures that the stress on the scraper and the running belt is within a certain appropriate range. Inside, the cleaning material is clean without damaging the tape.

The segmented polyurethane blade of the cleaner head is embedded in design, and the combined installation does not require screw fixation. It is easy to install and maintain, and the blade surface has good straightness.

The polyurethane blade of the cleaner is designed and manufactured according to the shape of the drum, which fits well with the drum and has good cleaning effect.

The scraper cleaner uses the gravity of the counterweight or the elastic force of the arm to make the scraper fixed on the arm in close contact with the working surface of the conveyor belt to remove residual materials on it. According to the number of scrapers, it can be divided into single-piece, double-piece and multi-piece scrapers. Scraper materials include rubber, carbide, ceramics, etc.

The scraper cleaner has a simple structure, the scraper is easy to replace, and the cleaning effect is relatively good. It is generally installed at the discharge drum to clean materials adhered to the conveyor belt. It is suitable for cleaning conveyor belts with vulcanized joints.